Monday, February 10, 2014

Cutting holes in reinforced concrete walls

To properly cut holes in a reinforced concrete wall you will need a specialized core drilling rig that will mount to the concrete wall by way of a concrete fastener such as a  1/2" x 6" wedge anchor.
This way your machine operates properly and does not move which could cause the core drill bit to get stuck in the hole that you are drilling. A properly secured core drill rig will save you hours of time and frustration.
        Tip: Always carry a 12" or larger adjustable wrench to tighten the wedge anchor nut until it will not tighten any longer.



For more great information on core drilling please visit our sites:
Charlotte Core Drill 704-245-0119
Carolina Core Drill  336-740-9755
Raleigh Core Drill  704-245-0119




1 comment:

  1. All of the team at Concrete Cutting Brisbane are highly experienced and fully qualified. We have all of the best high quality tools on hand to use to complete your work to a high quality standard. We can help with jobs including soft cutting, core drilling and road sawing.

    ReplyDelete